Vita Grow Brush

For best results, use at least once daily for 10-15 minutes.

We recommend cycling between red light and blue light throughout your hair care routine.

Make sure to fill the diffuser with water, then add your essential oils. Adding pure essential oil to the brush may cause it to clog.

• Fill the diffuser chamber with water until it is mostly full (10-15ml).
• Add several drops of your preferred hair growth oil.
• Hold the bottom button to power the brush on.
• Use the top left button to cycle between red/blue light.
• Use the top right button to enable massage mode.
• Click the bottom button once to enable the mist mode.

• The brush is water-resistant but not waterproof. Be sure to add water carefully to limit spillage.
• Open up the silicone cap on the top of the brush to access the diffuser chamber.
• Use a small container, dropper, or run the sink lightly to fill.
• The chamber holds about 15ml of liquid. Add at least 10ml of water (2/3 full).
• Once water is added, then add 3-5 drops of essential oil. Close the cap securely.

• We recommend using a cotton swab or paper towel with isopropyl rubbing alcohol to clean the outside of the brush and the bristles.
• To clean inside the diffuser chamber, rinse with a solution of warm water and isopropyl alcohol to clear built-up essential oils.
• The brush is not waterproof, so please do not submerge it underneath water while cleaning.

• The brush is water-resistant but not waterproof and should not be used under running water (sink, shower, etc.).
• When filling the chamber, add water carefully and limit spillage. A small measuring cup or dropper works great!